|
|
Product Details:
Payment & Shipping Terms:
|
Thickness: | 0.3mm | Dosage: | 500g/㎡ |
---|---|---|---|
Application Range: | Veneered Board, Osd, SPF | Fire Rate: | 15mins |
Color: | White | Shelf Life: | 6 Month |
High Light: | fireproof spray paint,anti fire coating |
Fifteen Minutes Safe Intumescent Fire Rated Paint For Polywood Veneered Board 0.3mm
Decorative fire retardant coating
It integrates decorative effect and fireproof function. it is particularly suitable for wooden structure, lumber, OSB, polywood, fiberwood etc. When the coating suffering fire attack, it can expand and form a uniform honeycomb layer, which can effectively delay the spread speed of fire,so endeavour to gain more valuable time for fire fighting.
Its main components are film-forming emulsion, phosphorus-nitrogen-carbon flame retardant materials, pigments and fillers, additives,etc.it has significant fireproofing effect, stable performance and the paint color can be customized
*MAIN FEATURERS*
*INTENDED USES*
Widely used for industrial and civil architecture, high-rise building, landscapes, hotels, theaters, temples, cultural and entertainment venues, ancient buildings of wood materials, fiberboard, particle board, etc.,but not for metal surfaces.
PRODUCT PARAMETER
Film Paint Color | White |
Fireproof Rating | More than 15mins when usage500g/sqm |
Construction Usage | 2 ~ 3 sqm / kg |
Surface Drying Time | 2 hrs |
Hard Drying Time | 5 hrs |
Termite Proof | YES |
Mildew Proof | YES |
Water Proof | NO |
PH | 6-7 |
Consturction Ambient Temperature | Between 5ºC (41ºF) and 30ºC (86ºF) |
VOC | / |
Shelf Time | 6 months |
Application Method | Brush/spray/roller |
Our products support spray, brush, and roller.
Requirement | Moisture content of base material should be 8%-13% |
Surface Preparation | The substrate surface must be clean,dry and free from contamination, such as dust,oil stain,water stain,etc. |
Mixing | This is one component, but need to stir evenly before application |
Construction Method | The construction method could be spray, brush, roller. the spray method is recommended if the constrution area is large,the airbrush caliber is 1.5-2mm.each painting thickness shall be 0.05mm-0.10mm, total painting times depends on the requirement. each painting interval time should be 2-4 hours |
Brush Tool | Wool brush or nylon brush |
Construction Condition | Dont execute construction when temprature is under 5℃ or air humidity is above 80%. maintain good ventilation |
Notes | Materials is not allowed to remain in hoses, guns or spray equipment. All unused materials should be sealed and, clean all tools timely after using with clean water. It is good to periodically flush the spray tools during the daily work.All surplus materials&empty containers should be properly disposed. |
FAQ
Contact Person: Sunny Lee